5x19mm Kitchen Cabinet Shelf Supports - Flat / Spoon / Paddle Type Pins - Zinc Plated Steel Pegs (Pack of 12)

Replace lost or bent shelf pins with these 5 mm spoon shelf supports. Made from zinc-plated steel, they fit standard 5 mm shelf holes in cabinets, bookcases, and wardrobes. Just push them in by hand, no tools needed.

• COMPATIBILITY: Shelf support pins for furniture and cabinets with standard 5 mm (approx. 3/16 in) shelf pin holes. Commonly used in kitchen cabinets, bookcases, bookshelves, entertainment centers, wardrobes, and display cabinets.
• USAGE: Each pin holds up one corner of an adjustable shelf. Four pins, one in each corner, support a shelf at any height along the row of pre-drilled holes, so shelves can be raised, lowered, or replaced without tools.
• SPECIFICATIONS: Zinc-plated steel for strength and corrosion resistance. 8 mm (approx. 5/16 in) round shank fits 5 mm holes, with an 11 mm (approx. 7/16 in) flat support end that gives the shelf a wide, stable surface to rest on. Overall length approx. 19 mm (approx. 3/4 in).
• INSTALLATION: Push the round end fully into the shelf hole by hand, with the flat side facing up, then repeat at the same height in all four corners. Rest the shelf on the flat ends and check that it sits level. No tools required.
• CONVENIENCE: Available in multiple pack sizes, so you can order exactly what you need to replace lost or bent pins, add extra shelves, or reassemble furniture after moving.